The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / (DG) E80 Seatalk2 output to ST60+

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) E80 Seatalk2 output to ST60+
04-20-18, 08:34 AM (This post was last modified: 04-20-18 09:03 AM by Derek - Raymarine - Moderator.)
Post: #1
Brettbc Offline
Junior Member
**
 		Posts: 2
Joined: Feb 2018
Reputation: 0
(DG) E80 Seatalk2 output to ST60+
Just replaced my C80 with an E80 connected to a DSM 300 via SeaTalk HS.
Trying to sort out how to connect my ST60+ (Depth) and assumed I could use the Seatalk 2 output on the back of the e80.

Figured there would be a SeaTalk 2 plug to a SeaTalk 1 (Flat 3-Pin) that would allow me to simply use the E80s SeaTalk2 output to feed data to my ST60 Depth?

This seems like the most basic way to get transducer data to my ST60+. Since I am no longer using the DSM output cable from the DSM300 this may be an option too, however, I can't locate a DSM to SeaTalk 1 cable either.

Any help would be most appreciated. Would rather not put a separate transducer in just to receive data on the ST60+.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
(DG) E80 Seatalk2 output to ST60+ - Brettbc - 04-20-18 08:34 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication