Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] e7 MFD Screen Malfunction
05-01-18, 09:42 AM
Post: #2
RE: [CA] e7 MFD Screen Malfunction
Welcome to the Raymarine Forum Doug,

It is recommended that the loaded system voltage be measured at the display's power plug. Should the measured voltage be within the operating range of the MFD (10.8V dc to 31.2V dc) and the MFD's screen have the specified appearance after being switched ON, then it would be recommended that the MFD be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: [CA] e7 MFD Screen Malfunction - Chuck - Raymarine - Moderator - 05-01-18 09:42 AM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)