The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Transducer Frequency for CHIRP/DownVision, SideVision and RealVision 3Dâ„¢ transducers
04-06-16, 08:21 AM (This post was last modified: 02-19-19 04:03 PM by Chuck - Raymarine - Moderator.)
Post: #1
Transducer Frequency for CHIRP/DownVision, SideVision and RealVision 3Dâ„¢ transducers
Transducer Frequency for CHIRP/DownVision, SideVision, and RealVision 3Dâ„¢ transducers

DownVision transducer elements of transducers designed for use with Dragonfly displays, ax8 MFDs, eSx8 MFDs, CP100 DownVision Sounder Module and AXIOM RV chirp across a 60kHz range centered on 350kHz. SideVision transducer elements of transducers designed for use with CP200 SideVision Sounder Module AXIOM RV MFDs also chirp across a 60kHz range centered on 350kHz.

The CPT-S and CHIRP Conical sonar transducer elements of transducers designed use with Dragonfly displays, ax8 MFDs, eSx8 MFDs, CP100 and AXIOM MFDs chirp across a 60kHz range centered on 200kHz.

The side-side beam angle of the DownVision and SideVision transducer elements is 60 degrees. The fore-aft beam angle of the DownVision and SideVision transducer elements is a quite narrow ... approximately 1.4 degrees.


RAYFAQ#
Find all posts by this user
Thread Closed 


Messages In This Thread
Transducer Frequency for CHIRP/DownVision, SideVision and RealVision 3Dâ„¢ transducers - Chuck - Raymarine - Moderator - 04-06-16 08:21 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)