[CA] EV-1 Firmware version info via LH3 menus on an es127

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] EV-1 Firmware version info via LH3 menus on an es127

05-17-18, 12:33 PM (This post was last modified: 05-17-18 01:05 PM by Chuck - Raymarine - Moderator.)

Post: #9

MSjack Offline

Junior Member

Posts: 35
Joined: Mar 2018
Reputation: 0

RE: [CA11] EV-1 Firmware version info via LH3 menus on an es127

I noticed under autopilot updates that this file is included and rather than downloading the entire LH3 Axiom version with other product updates can I just copy this single file to SD and use it to update the EV-1?

CCU_ReleaseV2_18.pkg 841KB

Jack - MS Gulf Coast
Current Ray Equipment - Axiom 7 RV serving as DM and networked to a eS127 -
Quantum Radar via WiFi to eS127, RMK-9 networked to eS127, EV-1 Sensor Core, RV-100 and B60 transducers.

« Next Oldest | Next Newest »

Messages In This Thread

[CA] EV-1 Firmware version info via LH3 menus on an es127 - MSjack - 05-14-18, 02:40 PM

RE: [CA] EV-1 Firmware version info via LH3 menus on an es127 - Chuck - Raymarine - Moderator - 05-16-18, 12:08 PM

RE: [CA] EV-1 Firmware version info via LH3 menus on an es127 - MSjack - 05-16-18, 03:03 PM

RE: [CA] EV-1 Firmware version info via LH3 menus on an es127 - Chuck - Raymarine - Moderator - 05-16-18, 03:36 PM

RE: [CA] EV-1 Firmware version info via LH3 menus on an es127 - MSjack - 05-17-18, 07:31 AM

RE: [CA] EV-1 Firmware version info via LH3 menus on an es127 - Chuck - Raymarine - Moderator - 05-17-18, 08:37 AM

RE: [CA] EV-1 Firmware version info via LH3 menus on an es127 - MSjack - 05-17-18, 10:28 AM

RE: [CA] EV-1 Firmware version info via LH3 menus on an es127 - Chuck - Raymarine - Moderator - 05-17-18, 10:49 AM

RE: [CA11] EV-1 Firmware version info via LH3 menus on an es127 - MSjack - 05-17-18 12:33 PM

RE: [CA11] EV-1 Firmware version info via LH3 menus on an es127 - Chuck - Raymarine - Moderator - 05-17-18, 01:08 PM

User(s) browsing this thread: 1 Guest(s)