The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Identify Engines feature doesn't work - third party engine interface installed
05-15-18, 10:14 AM (This post was last modified: 05-15-18 10:17 AM by Chuck - Raymarine - Moderator.)
Post: #1
Identify Engines feature doesn't work - third party engine interface installed
Identify Engines feature doesn't work - third party engine interface installed

Please note that the Identify Engines feature of Raymarine MFDs operating with LightHouse II or LightHouse 3 software is exclusively designed for use with engine systems which have been interfaced to the powered and properly terminated marine electronics SeaTalkng / NMEA 2000 backbone using Raymarine's ECI-100 Engine gateway. When using a third party engine gateway, care must be taken to ensure that the engine Instance IDs transmitted by the engine gateway match those specified within the engine interfacing FAQ found here. Should changes to the Instance IDs transmitted by the third party engine gateway need to be performed, such changes should be made in accordance with the third party engine gateway / engine manufacturer's instructions. When engine data is transmitted with the correct Instance ID(s) from the engine gateway, the Data application's panels displaying engine data will automatically populate with the corresponding engine data.


RAYFAQ#
Find all posts by this user
Thread Closed 


Messages In This Thread
Identify Engines feature doesn't work - third party engine interface installed - Chuck - Raymarine - Moderator - 05-15-18 10:14 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)