Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Ray Control, Ray Remote on Lighthouse II
07-05-18, 11:40 AM
Post: #6
RE: [CA11] Ray Control, Ray Remote on Lighthouse II
JBomber,

Q1. Is there anything I can do "in the field"?
A1. Should the Navionics Sonar Logging feature be enabled, you may want to try configuring it to OFF. I am aware of no other options which may correct the reported symptom other than possibly performing a System Settings and Data Reset command. Unfortunately, should the problem persist, then there would be no other recommendations other than to have the MFD bench tested/serviced by the Repair Center.

Q2. Would a large area of Navionics charts affect it?
A2. With the possible exception of having enabled the Navionics Sonar Logging feature and then having executed it continuously for a very, very long time as specified above, I am aware of no issue related to the use of Navionics cartography which may trigger the reported issue.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Ray Control, Ray Remote on Lighthouse II - Chuck - Raymarine - Moderator - 07-05-18 11:40 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)