Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] C70 to Axiom 9 Upgrade

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] C70 to Axiom 9 Upgrade
06-04-18, 10:34 AM (This post was last modified: 06-04-18 10:55 AM by Chuck - Raymarine - Moderator.)
Post: #13
Brad Smith Offline
Junior Member
**
 		Posts: 12
Joined: May 2018
Reputation: 0
RE: [CA11] C70 to Axiom 9 Upgrade
The GPS is already spliced into a 3-pin SeaTalk1 wire that was connected to the C70.

Do I need to just add a D244 SeaTalk Junction block and another SeaTalk1 to SeaTalkng converter ? Plug the yellow wire from converter into the Junction box and the new Converter ?

Leave the VHF plugged into the the current converter as it is now ?

Do I need to change any settings on the Axiom so the GPS works properly with the VHF ?

Thanks again,
Brad
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] C70 to Axiom 9 Upgrade - Brad Smith - 06-04-18 10:34 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication