Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] NMEA 2000 and Axiom 9
05-24-18, 08:58 AM (This post was last modified: 05-24-18 08:58 AM by Chuck - Raymarine - Moderator.)
Post: #5
RE: [CA11] NMEA 2000 and Axiom 9
Bill,

The new diagram appears to be correct. Should problems persist in displaying engine data on the MFD configuring the system to appear as in the diagram, then it would be recommended that a NMEA 2000 analyzer be interfaced to the to determine the exact content of the data being transmitted by the engine gateway to the marine electronics gateway. As indicated within the previously referenced FAQ, the Actisense NGT-1 and NMEA Reader computer software from Actisense are an excellent tool for inspecting communications traffic on a SeaTalkng / NMEA 2000 backbone. This tool is relatively inexpensive, very easy to use, and should be a part of any marine technicians tools when installing and/or troubleshooting SeaTalkng / NMEA 2000 communications.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] NMEA 2000 and Axiom 9 - will40 - 05-22-18, 05:04 PM
RE: [CA11] NMEA 2000 and Axiom 9 - Chuck - Raymarine - Moderator - 05-24-18 08:58 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)