Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Upgrade C120 to E120 Classic
05-29-18, 04:18 PM
Post: #2
RE: [CA11] Upgrade C120 to E120 Classic
Welcome to the Raymarine Forum wbdoll,

The sockets of the E-Series Classic MFDs and C-Series Classic MFDs are identical for the MFD's Power Cable, Analog Radar Cable, and NMEA 0183 Cables. The SeaTalk socket of the C-Series Classic MFDs was designed to accommodate a press-fit 3-pin SeaTalk plug. In contrast, the SeaTalk/Alarm Cable of the E-Series Classic MFD features a twist locking 6-pin connector. As such, the currently installed SeaTalk cable's leads would need to be spliced to E-Series Classic MFD's SeaTalk/Alarm Cable (red to red, yellow to yellow, and shield to black respectively).
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Upgrade C120 to E120 Classic - Chuck - Raymarine - Moderator - 05-29-18 04:18 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)