Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA11] C80/ DSM-300 Software Update Issues

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] C80/ DSM-300 Software Update Issues
05-29-18, 04:27 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] C80/ DSM-300 Software Update Issues
Welcome to the Raymarine Forum Ryan,

Regarding the MFD, it is recommended that a Factory Reset operation be commanded to the MFD following the software update. Upon rebooting, the MFD should operate normally.

Regarding the DSM, Raymarine does not recommend updating the software within DSM30/300 sounder modules above v3.16. While C-Series Classic MFDs were designed to communicate with the DSMs via hsb2 communications, the software updates which followed v3.16 were all designed to address MFDs which were instead designed to communicate with DSMs via Ethernet communications.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] C80/ DSM-300 Software Update Issues - Chuck - Raymarine - Moderator - 05-29-18 04:27 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication