The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] upgrading from e210 classics to axiom pro -- ac20 autopilot?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] upgrading from e210 classics to axiom pro -- ac20 autopilot?
05-31-18, 08:11 PM (This post was last modified: 06-01-18 01:56 PM by Chuck - Raymarine - Moderator.)
Post: #1
dkwhit Offline
Junior Member
**
 		Posts: 3
Joined: May 2018
Reputation: 0
[CA11] upgrading from e210 classics to axiom pro -- ac20 autopilot?
Hi --

I'm considering upgrading from a system with two e120 classics, to a pair of Axiom Pros. Two things I'm uncertain about:

To make it simple this year, I'd replace the old DSM300 with a CP370 so that I can continue to use the old Airmar M260 transducer. Can I use my old Seatalk HS switch to connect between CP370 & Axiom Pro? If not, I guess I need a special adapter cable to connect directly to one of the MFDs?

Also, the old system relies on a Simrad AC20 based autopilot with AP26, RC36, RPU80 & using NMEA0183 to talk to the e120's. Can I continue to use the old autopilot with the new displays & NMEA0183 on the Axiom Pro? AC20 also has NMEA2000 capability I believe; would that be a better choice, or is there some reason the old pilot will not work?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] upgrading from e210 classics to axiom pro -- ac20 autopilot? - dkwhit - 05-31-18 08:11 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication