The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / AIS v / [CA] [CA11] Using proAIS2 with AIS500 transceiver

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Using proAIS2 with AIS500 transceiver
06-03-18, 06:56 PM (This post was last modified: 06-04-18 01:06 PM by Chuck - Raymarine - Moderator.)
Post: #1
dantos Offline
Junior Member
**
 		Posts: 9
Joined: Apr 2018
Reputation: 0
[CA11] Using proAIS2 with AIS500 transceiver
I have purchased a boat with an AIS500 transceiver. I have transferred the MMSI number from the previous owner, so no change in MMSI number.

From reading the forums, it appears that I can use the proAIS2 software to change vessel information, by connecting my laptop to the AIS unit with a USB cable.

Yesterday I looked at the AIS500 unit, and I do not see a USB port. Is there one that I missed somewhere? Do I need to connect differently? The only connections that I can see are for: 1) antenna, GPS, VHF, and power data.

Respectfully,

David
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Using proAIS2 with AIS500 transceiver - dantos - 06-03-18 06:56 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication