Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Sheared Rudder Shaft Bolt - 2011 Beneteau

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Sheared Rudder Shaft Bolt - 2011 Beneteau
06-05-18, 02:55 PM (This post was last modified: 06-05-18 02:56 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Sheared Rudder Shaft Bolt - 2011 Beneteau
Welcome to the Raymarine Forum Brent,

The broken bolt appears to be from the tiller arm to which the autopilot drive unit has been attached. Please note that Raymarine neither manufactures nor sells tiller arms. I suspect that the pictured tiller arm may have been manufactured by Edson Marine and was installed when the autopilot was installed. It is recommended that a Certified Raymarine Installer be contacted to address the reported issue with the tiller arm. Please click here to view Raymarine's Dealer Locator web page from which one may locate Certified Raymarine Installers based on postal code or city, state or country.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Sheared Rudder Shaft Bolt - 2011 Beneteau - Chuck - Raymarine - Moderator - 06-05-18 02:55 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication