MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
[CA11] eS127 chart detail display problem

Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] eS127 chart detail display problem
06-05-18, 09:24 AM (This post was last modified: 06-07-18 09:51 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] eS127 chart detail display problem
I am running a Raymarine es127 hybrid touch MFD system with a master display belowdecks, and a slave display at the helm. Both machines were updated to Lighthouse II software last Fall.

I recently purchased a Lighthouse NOAA vector chart for the Northeast (Order Number: RC-16385-11052) . The master display belowdecks shows the chart in the Very Detailed mode, with options for Simple and Detailed modes.. However, the slave display at the helm shows the chart only in the Simple mode, with no option for Detailed or Very Detailed display.

I need the Very Detailed view on both displays.

Can you help me sort this out?

Thanks very much.

Dan Coit
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
[CA11] eS127 chart detail display problem - - 06-05-18 09:24 AM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)