Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST 60 Tridata Speed Indication INOP
06-14-18, 12:54 PM
Post: #2
RE: [CA11] ST 60 Tridata Speed Indication INOP
Welcome to the Raymarine Forum MissHan,

Depth and Speed transducers which had been designed for use with the RayData should also be compatible with a ST60 Tridata Display. Failure to report speed and temperature data may be indicative of a failure of the ST60 Tridata Display, the speed/temp transducer, or both. Raymarine can no longer service ST60 Tridata Displays and it would be recommended that such displays be replaced with an i50 Tridata. Please click here to view a FAQ addressing how the transducer's speed sensor may be tested. Should the ST60 Tridata not sense that a compatible temperature transducer has been interfaced to it, then it will not report speed. Please click here to view a FAQ addressing how the temperature transducer may be tested.

With the exception of transducers identified as SMART, any of the instrument depth and speed/temp transducers found here are compatible with the ST60 Tridata instrument as well as with an i50 Tridata instrument. The part numbers listed on the linked web pages are current.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] ST 60 Tridata Speed Indication INOP - Chuck - Raymarine - Moderator - 06-14-18 12:54 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)