[CA11] Axiom 9 will not display both fuel tanks

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Axiom 9 will not display both fuel tanks

06-19-18, 02:14 PM

Post: #2

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] Axiom 9 will not display both fuel tanks

Welcome to the Raymarine Forum Mike,

The reported issue is typically the result of incorrect Instance IDs being transmitted within the PGNs associated with fluid levels. Please click here to view a FAQ addressing this subject. In this case, it would be recommended that a NMEA 2000 analyzer be interfaced to the backbone to inspect the Fluid Level PGNs (127505) being transmitted by the Mercruiser system to the NMEA 2000 backbone. I suspect that you will find that they are not as identified within the referenced FAQ.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Axiom 9 will not display both fuel tanks - Mike sandor - 06-18-18, 10:46 AM

RE: [CA11] Axiom 9 will not display both fuel tanks - Chuck - Raymarine - Moderator - 06-19-18 02:14 PM

RE: [CA11] Axiom 9 will not display both fuel tanks - jwasko - 06-19-18, 05:29 PM

RE: [CA11] Axiom 9 will not display both fuel tanks - Chuck - Raymarine - Moderator - 06-20-18, 09:04 AM

RE: [CA11] Axiom 9 will not display both fuel tanks - argus - 07-05-18, 10:30 AM

RE: [CA11] Axiom 9 will not display both fuel tanks - Chuck - Raymarine - Moderator - 07-05-18, 11:41 AM

RE: [CA11] Axiom 9 will not display both fuel tanks - brian Fitz - 09-19-18, 03:16 PM

RE: [CA11] Axiom 9 will not display both fuel tanks - Chuck - Raymarine - Moderator - 09-19-18, 04:15 PM

User(s) browsing this thread: 1 Guest(s)