Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 9 will not display both fuel tanks
09-19-18, 03:16 PM
Post: #7
RE: [CA11] Axiom 9 will not display both fuel tanks
I have an Axiom 7 installed on a 2004 SR340 Sundancer. I installed a Mercury Smartcraft Gateway, and connected it into a NMEA Backbone. The Axiom 7 is connected to that backbone.

I have both engine (8.1S Horizons) information to the Axiom. I have 2 fuel tanks, but only one will indicate quantity on the Axiom. I have read the "instances" for the tanks must be set to "0" for the port tank, and "1" for the starboard tank.

I spoke to Mercury Customer support and they are in the dark about this.

Any idea who I can talk to to make this work? Mercury has not been any help so far. Has anyone successfully accomplished this, and how did they do it?

Can the Mercury DDT change the messaging instances for the fuel tanks?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom 9 will not display both fuel tanks - brian Fitz - 09-19-18 03:16 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)