[CA] [CA11] NMEA 0183 output RL80C

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum firepro,

Unfortunately, support for this long retired product is now becoming a bit limited. The diagnostics features of the hsb/hsb2/Pathfinder Series Displays may be used to determine not only which NMEA 0183 sentences are being transmitted by the display, but also which NMEA 0183 Talker IDs are being included within each sentence. The command sequence to view the display's NMEA 0183 transmit buffer is listed below.
- Select the Chart application by pressing the DISPLAY button until a page listing the Chart application has been selected
- Press the ENTER button
- Press the MENU button
- Press the Chart Set-up function button
- Press and hold the ENTER button pressed until the communications diagnostics function button labels (BUILT IN TEST, SEATALK DATA, NMEA DATA, EOL TEST)
- Press the NMEA DATA function button
- Examine the Transmitted Data column of the displayed NMEA 0183 input and output buffers