Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] axiom pro rvx 16 and navionics p+

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] axiom pro rvx 16 and navionics p+
06-21-18, 12:05 PM (This post was last modified: 06-21-18 12:06 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] axiom pro rvx 16 and navionics p+
Welcome to the Raymarine Forum raptor771 ,

Please click here to view a FAQ addressing this subject. The red shallow water line shown within the Chart application page/pane being viewed appears to be the Chart application's Navionics SonarChart Live feature. This may be configured ON/OFF within the Chart application page pane being viewed (you will need to do this with the MFD's other Chart application page/panes as well) via the command sequence MENU->SETTINGS->DEPTH->SONARCHART LIVE->ON/OFF. Similarly, the Sonar Logging feature (this data is used as the basis for the SonarChart Live feature) may be configured ON/OFF via the command sequence MENU->SETTINGS->DEPTH->SONAR LOGGING->ON/OFF.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] axiom pro rvx 16 and navionics p+ - Chuck - Raymarine - Moderator - 06-21-18 12:05 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication