[CA11] Axiom Rockford Fosgate Integration

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Axiom Rockford Fosgate Integration

06-28-18, 08:09 PM

Post: #3

petdoc Offline

Junior Member

Posts: 4
Joined: Jun 2018
Reputation: 0

RE: [CA11] Axiom Rockford Fosgate Integration

I was wondering about that. Good thing I did not run the spur cable yet. So the blue backbone cable would plug in to one of the blue sockets that currently has a blue plug on the 5 port back bone from the starter kit? I would still need an adapter to go from nmea 2000 from the Rockford PMX-can. Can you tell me the part numbers needed to go from pmx-can to the 5 port backbone approx 11 feet away at the helm.
Thank you

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Axiom Rockford Fosgate Integration - petdoc - 06-28-18, 12:46 AM

RE: [CA11] Axiom Rockford Fosgate Integration - Chuck - Raymarine - Moderator - 06-28-18, 10:13 AM

RE: [CA11] Axiom Rockford Fosgate Integration - petdoc - 06-28-18 08:09 PM

RE: [CA11] Axiom Rockford Fosgate Integration - Chuck - Raymarine - Moderator - 06-29-18, 08:23 AM

RE: [CA11] Axiom Rockford Fosgate Integration - petdoc - 07-23-18, 09:23 AM

RE: [CA11] Axiom Rockford Fosgate Integration - Chuck - Raymarine - Moderator - 07-23-18, 09:32 AM

RE: [CA11] Axiom Rockford Fosgate Integration - petdoc - 07-23-18, 09:59 AM

RE: [CA11] Axiom Rockford Fosgate Integration - Chuck - Raymarine - Moderator - 07-23-18, 12:37 PM

User(s) browsing this thread: 1 Guest(s)