[CA] [CA11] Axiom Rockford Fosgate Integration

[Chuck - Raymarine - Moderator]

petdoc,

Q. Is there any programming that needs to be done or should it just pick up the RF stereo?
A. Negative. One need simply run the MFD's Audio app. Should the MFD not have been updated with LightHouse 3 v3.5.40 or later software, then it is recommended that you do so. The pin-out for a SeaTalkng spur plug may be found within the FAQ found here to permit you to verify power to the backbone. Should the problem persist, then it would be recommended that the MFD's diagnostics feature (HOME->SETTINGS->NETWORK->DIAGNOSTICS->PRODUCT INFO) be used to verify that the MFD is listing the Rockford Fosgate entertainment system and any other SeaTalkng / NMEA 2000 devices which have been interfaced to the system. If not, then it is recommended that a NMEA 2000 analyzer (ex. Actisense NGT-1 w/Actisense NMEA Reader PC software, etc.), be interfaced to the backbone to verify that these devices are both seen on the backbone.