[CA] [CA11] Axiom 9 Problem Selecting Boat Position on Chart
|
06-29-18, 11:55 AM
(This post was last modified: 07-04-18 05:23 AM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] Axiom 9 Problem Selecting Boat Position on Chart
I like running my chart North Up with the boat positioned on the chart at about the 1/3rd point. No matter what I select as far as chart position (North Up/Heads Up/Course Up), the Boat Position Indicator always shows Center and is not highlighted so it cannot be selected to change it from Centered to the other choices. For safety reasons, I have only tried changing the boat position on the Chart while sitting at the dock. Must the boat be moving in order to change the position from the Center, or is there something wrong with the unit? I'm using Navionics Charts.
Thanks Sal Guttilla |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Axiom 9 Problem Selecting Boat Position on Chart - S Guttilla - 06-29-18 11:55 AM
RE: [CA11] Axiom 9 Problem Selecting Boat Position on Chart - Chuck - Raymarine - Moderator - 07-03-18, 12:31 PM
|
User(s) browsing this thread: 1 Guest(s)