The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.3.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] i40 Depth with P79 Transducer erratic readings
07-04-18, 03:19 AM (This post was last modified: 03-21-19 09:45 AM by Chuck - Raymarine - Moderator.)
Post: #1
[DG11] i40 Depth with P79 Transducer erratic readings
I am using i40 Depth connected to a P79 In-hull transducer on a Shrimper 17 daysailer. Correct cables used.

At times depth shown appears to be valid and changes as expected. On occasion though the reading with show 1ft, even when clearly there is more depth. The unit after some time will then revert to what appears to be a normal reading. Unable to identify yet what circumstances trigger the behaviour. Raising or lowering the centre plate is not a factor as the plate is normally down. It may be triggered by entering shallower water.

Any ideas what I should do to investigate/correct?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] i40 Depth with P79 Transducer erratic readings - SAAH - 07-04-18 03:19 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)