[CA] [CA11] Airmar b164 and RV-100 on Axiom 7

[Chuck - Raymarine - Moderator]

hstechfl,

When using a Y-Cable which is designed to support simultaneous use of a RealVision transducer along with a compatible 50kHz/200kHz transducer, both transducers must be connected to the Y-Cable at all times. Should only one of these transducers be interfaced to the Y-Cable, then it will not be detected by the system.

Please note that the B164 transducer is produced in a number of variants, each designed to meet the specific specifications of a manufacturer and/or fishfinder ... including Raymarine fishfinding products. It is possible that the transducer's ID is not being communicated to the Axiom RV MFD. Please respond with a photo of the transducer's identification tag which clearly shows all information printed on that tag in order that we may positively identify the model of Airmar B164 transducer.