[CA] [CA11] Transducer Replacement
|
08-13-18, 01:02 PM
(This post was last modified: 08-13-18 01:03 PM by Chuck - Raymarine - Moderator.)
Post: #4
|
|||
|
|||
RE: [CA11] Transducer Replacement
TIGI,
Depth and speed/temperature transducers which were designed for use with ST60/ST60+ instruments cannot be directly connected to i70/i70S MFIDs. These transducers must be interfaced to an iTC-5 Analog Instrument Transducer Converter which will form part of the powered and properly terminated SeaTalkng / NMEA 2000 backbone to which the i70/i70S MFID will be interfaced. With the exception of the B744V/B744VL Instrument depth/speed/temperature transducer, all thru-hull depth and speed/temp instrument transducers which were designed for use with ST40/ST60/ST60+ instruments feature the same 2" shaft as Raymarine's Smart instrument transducers and analog thru-hull depth and speed/temperature which are offered for use with i40/i50 instruments and iTC-5. Should the currently installed depth and speed/temp transducers be operational, then there would be no need to replace them when used with an iTC-5. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Transducer Replacement - lwitty - 07-08-18, 01:14 PM
RE: [CA11] Transducer Replacement - Chuck - Raymarine - Moderator - 07-24-18, 12:51 PM
RE: [CA11] Transducer Replacement - TIGI - 08-08-18, 10:08 AM
RE: [CA11] Transducer Replacement - Chuck - Raymarine - Moderator - 08-13-18 01:02 PM
|
User(s) browsing this thread: 1 Guest(s)