The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [DG] [DG] connecting a S100 Remote to Seatalkng network

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG] connecting a S100 Remote to Seatalkng network
07-10-18, 08:46 AM (This post was last modified: 07-11-18 05:10 AM by Derek - Raymarine - Moderator.)
Post: #1
JHULMER Offline
Junior Member
**
 		Posts: 2
Joined: Sep 2016
Reputation: 0
[DG] connecting a S100 Remote to Seatalkng network
I installed a new EV-200 autopilot system that is connected to my seatalkng network. This is working fine, however, when I connected my S100 autopilot remote to my seatalkng network using a NMEA 0183 VHF to the SeaTalkng network converter kit I started having trouble.

The signal never gets over 3 bars and the connection cuts in and out giving me NO PILOT or No Link errors on the remote creating a less than safe situation.

Can you connect the NMEA 0183 VHF to the SeaTalkng network converter kit to a S100 remote or is it strictly for VHF radios? Have I made a bad assumption that it's the same as the SeaTalk to SeaTalkng converter?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG] connecting a S100 Remote to Seatalkng network - JHULMER - 07-10-18 08:46 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication