The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.3.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error

Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Axiom Pro 12 - real vision issue
07-11-18, 07:43 AM (This post was last modified: 07-24-18 07:36 AM by Chuck - Raymarine - Moderator.)
Post: #1
[TG11] Axiom Pro 12 - real vision issue
Wondering what I have wrong with my Real vision 3d setup.

I have the dual transducers mounted under the boat on each side of the keel.

When I go to the 3d screen, the bottom is shown, but is only a thin strip down the middle. This is the case whether I am in my slip or in 80 fow.

The attachment is a capture from your website. Mine only shows out the 25ft on each side of the boat.

I'll try to get a capture next time I'm out.

Any idea if I have a setting wrong?

1999 Sea Ray 370 Express Cruiser Hardtop
Twin 8.1 Horizons, ZF Hurth Transmissions,
Axiom Pro 12
Axiom 12
Quantum II Radar
Real Vision 3D
1kW CHIRP sonar
B275 Transducer
Ray 60 VHF
ACU 150 Autopilot
Smart Remote
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
[TG11] Axiom Pro 12 - real vision issue - West32 - 07-11-18 07:43 AM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)