Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Axiom Pro 12 - real vision issue
07-18-18, 10:07 PM (This post was last modified: 07-24-18 07:36 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [TG11] Axiom Pro 12 - real vision issue
The simplest explanation is that your current range setting is a bit narrow. The default Auto Range setting doesn't suit everybody (including me, actually), so I would suggest going into the menu, setting Range to Manual and ranging out a bit.

If that doesn't get you what you're after, send us some clear, high-resolution, full-screen photos of the sounder screen showing what you're seeing so that we can give you a more in-depth answer.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] Axiom Pro 12 - real vision issue - Tom - Raymarine - Moderator - 07-18-18 10:07 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)