Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] GPM400 to Axiom Pro upgrade/retrofit
07-17-18, 05:00 PM
Post: #11
RE: [CA11] GPM400 to Axiom Pro upgrade/retrofit
Chuck - true. The issue is that it would be helpful to see the actual xl unit to determine if their are screw holes to adequately mount a fabricated plate upon similar to the ball unit on the pro unit. Without seeing it - it’s difficult to “take that jump”. Granted I could order it and take it to a fabricator to determine feasibility and then return if it doesn’t work - but I try not to return things under that scenario as it’s a hassle that shouldn’t be necessary.

Just thinking through my options right now. Because I could also have a carpenter fabricate a nice cherry helm on top of my current helm table.

From a performance - cpu/speed/memory - is their any difference between the pro and XL ? They both claim quad core etc etc I know the XL supposedly will let you control your pc. But that seems to be a feature that could apply to both unless something was functionally different.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] GPM400 to Axiom Pro upgrade/retrofit - anthem - 07-17-18 05:00 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)