MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
[CA11] Replace RayPilot650/CC100 with Type1 Pump


Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Replace RayPilot650/CC100 with Type1 Pump
07-16-18, 03:14 PM (This post was last modified: 07-19-18 12:06 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Replace RayPilot650/CC100 with Type1 Pump
I have a Raypilot 650, Course Computer 100 with a type 1 pump autopilot system and Fluxgate Compass. It has been acting up a bit and I have been considering upgrading it but I really don't want to get into replacing the pump and Rudder Position sensor. The System is integrated with a Raymarine RL80C that I use for Radar, backup chart plotter and that feeds NMEA 0183 to a TimeZero PC based Navigation System. I'm looking to replace the head end units and have the RL80C get seatalk data from the new Autopilot and be able to control it if needed but primarily the TimeZero will be controlling the Autopilot. So the question is what are my options?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Replace RayPilot650/CC100 with Type1 Pump - GadgetBob42 - 07-16-18 03:14 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)