Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Replace RayPilot650/CC100 with Type1 Pump
07-19-18, 11:18 AM (This post was last modified: 07-19-18 12:07 PM by Chuck - Raymarine - Moderator.)
Post: #4
RE: [CA11] Replace RayPilot650/CC100 with Type1 Pump
Bob,

It sounds like you're on the right track. If you don't have much of a backbone presently, it may be worth considering to simply add additional spur sockets to the backbone which will be constructed from SeaTalkng networking components and then simply use a DeviceNet (F) to SeaTalkng Spur Adapter Cable to interface the Fusion, Maretron, and any other NMEA 2000 devices to the backbone which will be constructed from SeaTalkng networking components.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Replace RayPilot650/CC100 with Type1 Pump - Chuck - Raymarine - Moderator - 07-19-18 11:18 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)