Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ES98, CP200, CP100 guidance
07-19-18, 03:30 PM
Post: #2
RE: [CA11] ES98, CP200, CP100 guidance
Welcome to the Raymarine Forum MartynCat,

The ax8 MFDs and eSx8 MFD feature internal DownVision sonar circuitry permitting their Transducer socket to be directly mated to a compatible DownVision or CPT-S transducer. The Ethernet Network (RayNet) communications socket of the MFD may be interfaced to a CP200 via an appropriate length of RayNet (F) to RayNet (F) Cable. The CPT-200 SideVision transducer will plug directly into the transducer socket of the CP200. A HS5 RayNet Network Switch would only be necessary if both of the MFD's Ethernet Network communications sockets are already in use.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: [CA11] ES98, CP200, CP100 guidance - Chuck - Raymarine - Moderator - 07-19-18 03:30 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)