[DG11] Question concerning EV-100 wheel pilot and NMEA2000 wind data

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[DG] [DG11] Question concerning EV-100 wheel pilot and NMEA2000 wind data

07-18-18, 04:22 AM (This post was last modified: 07-18-18 03:47 PM by Chuck - Raymarine - Moderator.)

Post: #1

Harri

Junior Member

Posts: 3
Joined: Jul 2018
Reputation: 0

[DG11] Question concerning EV-100 wheel pilot and NMEA2000 wind data

Hi,

We have EV100 wheel pilot and Axiom plotter in SeatalkNG which is bridged to N2k network in which we have wind (speed, depth, temp) data available. Now the issue is that EV100 does not recognise wind data and we are not able to use any wind modes of autopilot. However Axiom and EV100 do recognise and shows depth/boatspeed data also originated from n2k sensors.

Any advice appreciated.

Best regards,

Harri

« Next Oldest | Next Newest »

Messages In This Thread

[DG11] Question concerning EV-100 wheel pilot and NMEA2000 wind data - Harri - 07-18-18 04:22 AM

RE: [DG11] Question concerning EV-100 wheel pilot and NMEA2000 wind data - Derek - Raymarine - Moderator - 07-19-18, 09:08 AM

RE: [DG11] Question concerning EV-100 wheel pilot and NMEA2000 wind data - Harri - 07-20-18, 06:14 AM

RE: [DG11] Question concerning EV-100 wheel pilot and NMEA2000 wind data - Harri - 07-23-18, 01:39 PM

RE: [DG11] Question concerning EV-100 wheel pilot and NMEA2000 wind data - Derek - Raymarine - Moderator - 07-20-18, 11:04 AM

RE: [DG11] Question concerning EV-100 wheel pilot and NMEA2000 wind data - Derek - Raymarine - Moderator - 07-24-18, 11:15 AM

User(s) browsing this thread: 1 Guest(s)