Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Loss of DSM300 signal
04-19-16, 12:04 PM
Post: #2
RE: Loss of DSM300 signal
Welcome to the Raymarine Forum Tolly Sasha,

Please note that the E-Series Classic MFDs other compatible Ethernet based products are not designed to be interfaced to one another using CAT5 cable. Only an assembly constructed from a pair of SeaTalkhs Cables which have been joined with a SeaTalkhs Crossover Coupler or SeaTalkhs Network Switch should be used to interface the MFD's SeaTalkhs port to the SeaTalkhs port of the DSM. Please click here to view additional information addressing troubleshooting communications between a DSM and an E-Series Classic MFD.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
Loss of DSM300 signal - Tolly Sasha - 04-19-16, 11:22 AM
RE: Loss of DSM300 signal - Chuck - Raymarine - Moderator - 04-19-16 12:04 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)