The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] E120 Master/Slave issues
08-01-18, 07:22 AM (This post was last modified: 08-03-18 01:31 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] E120 Master/Slave issues
Currently have two 9 year old E120 displays that are networked together. I have one set to master. Don't know a way to set the other to slave, but it is not set to master. Frequently, I get a message on the non-master unit that data is missing and the unit needs to be set as master. If I turn the unit off and then on again, the alarm goes away and I usually don't see it for the rest of the day. This issue has only surfaced in the last year, as previously, I did not get these alarms. I've tried resetting both units and starting all over again, but in a day or two, I get the alarm again. I've also tried starting the master first and allowing it to completely settle before starting the second unit, but that doesn't seem to make a difference.

Is there a way to set the second unit to Slave? Is it possible to just set both units to Master?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] E120 Master/Slave issues - Kurtzrr@comcast.net - 08-01-18 07:22 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)