The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [TG] Wind speed no longer working

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] Wind speed no longer working
08-05-18, 06:16 AM (This post was last modified: 08-14-18 02:46 AM by Tom - Raymarine - Moderator.)
Post: #1
Perry123 Offline
Junior Member
**
 		Posts: 7
Joined: Feb 2018
Reputation: 0
Wind speed no longer working
Hello-

We have a masthead vane/cups connected to a STng system via an ITC-5 transducer converter. Wind speed and direction are displayed on an i70 display. Recently the wind speed portion has died and is only showing 0.0 knots. Wind direction is still good.

I followed the troubleshooting instructions and found 3.246V between the yellow and shield wires at the connection to the iTC-5. This is within the "normal' values (0-5V for this circuit). Yet the display still shows 0.0.

Any thoughts on how to troubleshoot this further?

Cheers- Matt
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Wind speed no longer working - Perry123 - 08-05-18 06:16 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication