The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] ES127 Not reading CP470 W/ B175M

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ES127 Not reading CP470 W/ B175M
08-06-18, 12:08 PM (This post was last modified: 08-14-18 11:04 AM by Chuck - Raymarine - Moderator.)
Post: #1
Weedlines Offline
Junior Member
**
 		Posts: 4
Joined: Jul 2018
Reputation: 0
[CA11] ES127 Not reading CP470 W/ B175M
Needing help, Recently added a CP470 and an Airmar B175m to an ES127 that works fine with built in sonar connected to B744l transducer.
Since the upgrade the mfd. list the cp470 but will not display any data on the screen. Tried a mfd master reset but still not working. Any help would be greatly appreciated...
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] ES127 Not reading CP470 W/ B175M - Weedlines - 08-06-18 12:08 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication