The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Readings at planing speeds.
08-11-18, 04:15 PM (This post was last modified: 08-16-18 02:07 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Readings at planing speeds.
I have DS600X with an Airmar P66 transducer. I mounted the transducer according full the manufacturer's instructions, with about an 1/8 inch showing below the transom. It's mounted on an 1999 18' Lund Alaskan SS with a 1999 johnson 2 stroke 40.

I get depth readings at slower speed, maybe up to 10 to 12 knots, especially if the boat is fully loaded. If im alone, and cruising at 18 to 20 knots, i lose the depth reading. Is it unrealistic to expect to be able to get readings at higher speeds? Are there things i can do to promote this?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Readings at planing speeds. - dvto2 - 08-11-18 04:15 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)