European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
[CA] [CA11] Replacing ST40 Depth Instrument
|
|
08-13-18, 12:20 PM
(This post was last modified: 08-17-18 12:58 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
|
[CA11] Replacing ST40 Depth Instrument
My boat (2004 model) has an ST40 Depth with a display that has seen better days. Rather than going to secondary markets for a used ST40, will the i50 Depth work in its place?
I don't have a positive ID on the transducer, but the ST40 manual calls for an M78713, which looks to be supported on the i50. The i50 pinout looks the same with black, blue, and screen. The intent would be to wire the transducer per spec, use an STng to ST cable (A06047), interfacing it to an open port in a 3-way ST block for power and comms to the ST data stream. Is the proposed installation valid? |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
[CA11] Replacing ST40 Depth Instrument - mjoplin - 08-13-18 12:20 PM
RE: [CA11] Replacing ST40 Depth Instrument - Chuck - Raymarine - Moderator - 08-17-18, 01:00 PM
RE: [CA11] Replacing ST40 Depth Instrument - mjoplin - 08-20-18, 01:34 PM
RE: [CA11] Replacing ST40 Depth Instrument - Chuck - Raymarine - Moderator - 08-20-18, 01:34 PM
|
User(s) browsing this thread: 1 Guest(s)