The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Ray55 VHF to Axiom connection
08-18-18, 05:35 AM (This post was last modified: 08-21-18 01:31 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Ray55 VHF to Axiom connection
Attempting to connect my Ray55 VHF to my new Axiom 12 for GPS. “No GPS” displayed on the VHF. It is connected via a converter: Master MFD spur to connector cable to white connector cable to converter (white port), then from the yellow converter port, red and yellow pigtail wires to grey and purple to VHF. Should I be feeding power to the converter independently via a white port and red cable? Axiom manual seems to say NO, that the spur should provide power and it must only be fed that way?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Ray55 VHF to Axiom connection - Keemosabe - 08-18-18 05:35 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)