The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [DG] [DG] ST6000 installation

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG] ST6000 installation
08-18-18, 07:54 AM (This post was last modified: 08-20-18 08:03 AM by Derek - Raymarine - Moderator.)
Post: #1
Minimage Offline
Junior Member
**
 		Posts: 2
Joined: Aug 2018
Reputation: 0
[DG] ST6000 installation
Hi

I am looking to complete the installation on my 28 year old boat, which I bought a couple of years ago and which hasn't been in the water yet. It came with Autohelm instruments all unused and in their boxes, ST6000 pilot system and linear drive unit along with ST50 wind, depth, speed control heads and transducers.

I have bench tested the kit and all works fine except the pilot system, where I get a read out stating "No Link" . I believe I have wired everything up correctly as per the diagram. So can anyone help with a diagnosis here please? I have attached a photo to show the arrangement with the read out on the bench.

thanks
Mark


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG] ST6000 installation - Minimage - 08-18-18 07:54 AM
RE: [DG] ST6000 installation - Minimage - 08-24-18, 12:47 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication