Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Waypoint issues on Axiom 9
08-22-18, 03:14 PM (This post was last modified: 08-22-18 03:15 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Waypoint issues on Axiom 9
Welcome to the Raymarine Forum Brad,

A defect was introduced within the LightHouse 3 software (we believe that it was introduced in LH 3 v3.6.32) in which the names associated with waypoints included within routes were lost during the import process. It is expected that this issue should be corrected within the next LightHouse 3 software update. With regard to waypoint data not being correctly stored when entered into the MFD via its user interface or when imported from a GPX data file, we have received no prior reports of such issues. The most common cause for such reports involves a failure of the operator to convert data from DMS (degrees minutes seconds) to DM (degress minutes) format. Please click here to view a FAQ addressing this subject. With the exception of the import issue regarding routes specified above, most GPX data import issues result from attempting to import data which violates the constraints of the MFD. Should you have verified that your data has violated none of these constraints or find that a waypoint from your GPX file has had its coordinates changed during the import process, then please attach your GPX file to a response to this thread and additionally identify at least one waypoint name having coordinates which changed during the import process. GPX files are not shared with the public unless specified.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Waypoint issues on Axiom 9 - Chuck - Raymarine - Moderator - 08-22-18 03:14 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)