The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Radar v / [DG] [DG11] Radar not connected

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Radar not connected
08-24-18, 11:30 AM (This post was last modified: 08-28-18 11:12 AM by Derek - Raymarine - Moderator.)
Post: #1
Anchordolphyn Offline
Junior Member
**
 		Posts: 1
Joined: Aug 2018
Reputation: 0
[DG11] Radar not connected
Good morning, I am a new member of this forum.
On my sailboat I have a raymarine hd digital radome connected to a multifunction E7 display that is also connected to other raymarine instruments like wind, autopilot, AIS and tridata.
The radar was mounted 5 years ago and worked normally but since 2 years happens the following: while the radar is working normally suddenly appears "radar not connected". The problem appears more and more frequently. The radar returns to normal working randomly.
I asked the local raymarine dealer to check the radar but he was not able to understand the reason of the problem.

Thanks in advance
Regards
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] Radar not connected - Anchordolphyn - 08-24-18 11:30 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication