MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
[CA11] Bootloader?


Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Bootloader?
09-04-18, 06:49 AM (This post was last modified: 09-13-18 09:37 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Bootloader?
I upgraded from 2001 era system consisting of a RL80C RN300/RS125 GPS system. Replaced with an a128 MFD and left in place a ST60 tridata and ST7000+ autopilot system by installing a seatalk to seatalkng converter. Additionally, I have a DSM300 networked in via Raynet.

Everything working well except the DSM300 give erroneous dept readings. When I first turn on I read 9.9 ft but on in 48 ft of water. See picture.


I am trying to update the firmware for the st/stng converter and the DSM300. I see I need version 4.20. Does this cover both the converter and the DSM300?

However I see I need bootloader v5.16. Is this included in the update or is it a separate file.

Please advise best practice to upgrade these products. Any other upgrades required /recommended?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Bootloader? - dtfeld - 09-04-18 06:49 AM
RE: [CA11] Bootloader? - dtfeld - 09-22-18, 07:40 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)