The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DM] [CA11] Integrating GPS sensor to E80 with NMEA
09-05-18, 09:34 AM (This post was last modified: 09-18-18 08:11 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Integrating GPS sensor to E80 with NMEA
I have an E80 MFD with RS125 GPS sensor that is intermittently indicating NO FIX. I've tried replacing the battery in the RS125 but still get NO FIX (intermittent). I'm considering replacing the GPS sensor with a new sensor that uses NMEA 0183. I also have other instruments such as ST60+ speed, depth, wind and ST7000 autohelm. I'm assuming these are connected using SeaTalk, but need to confirm (it's a 2009 Hunter 38 sailboat). Can I simply connect the new GPS sensor directly to the MFD using NMEA 0183, or do I need to get a NMEA 0183 to SeaTalk converter and connect the GPS through the converter? Also is there anything else that might be causing the intermittent NO FIX? Thanks.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Integrating GPS sensor to E80 with NMEA - robr - 09-05-18 09:34 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)