The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] St8001 display stuck on 15 degrees

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] St8001 display stuck on 15 degrees
09-08-18, 10:05 AM (This post was last modified: 09-12-18 02:29 PM by Chuck - Raymarine - Moderator.)
Post: #1
pacificlegend1@gmail.com Offline
Junior Member
**
 		Posts: 1
Joined: Aug 2018
Reputation: 0
[CA11] St8001 display stuck on 15 degrees
I have a 30 ft crab boat equipped an st8001 auto pilot system. The display indicates the rudder is at 15 degrees starboard no matter the actual rudder position. If I engage the auto pilot to dead reacon, it will not operate properly because it is reading the false rudder angle. In standby made, I have complete control of the wheel. However, the display will occasionally show cross track error.
I have checked all connections and terminations. I followed the trouble shooting procedure for the rudder reference indicator as described in download from raymarine. All ohm readings indicated the rudder reference is working properly.
What is my next step of troubleshooting so I don't have to blindly waste money on replacing parts. Is there a test for the dash mounted display and the "brain" that is mounted in the cuddy cabin? Thx Vince
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] St8001 display stuck on 15 degrees - pacificlegend1@gmail.com - 09-08-18 10:05 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication