[CA] [CA11] Axiom Heading Vector
|
09-09-18, 08:55 PM
(This post was last modified: 09-10-18 02:01 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] Axiom Heading Vector
I have an Axiom 12 and added an EV1 to my system today. Intialized the EV1 and their was a software update that was completed. I took the boat out and after operating the boat around the lake for about an hour I received a notification on the MFD that the EV1 has been calibrated. My issue is I still cannot get the heading vector to come on. COG vector is working. I hold the ship icon and the heading box is checked. I have tried unchecking and rechecking the box. What am I missing? All systems have most recent software updates. My system Axiom 12, Quantum 2, EV1, and using a Garmin NMEA 2000 external GPS reciever. My previous MFD was a Garmin, so I just left that receiver. Thanks
|
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Axiom Heading Vector - TXSEARAY - 09-09-18 08:55 PM
RE: [CA11] Axiom Heading Vector - Chuck - Raymarine - Moderator - 09-10-18, 02:15 PM
RE: [CA11] Axiom Heading Vector - TXSEARAY - 09-12-18, 04:30 PM
RE: [CA11] Axiom Heading Vector - Chuck - Raymarine - Moderator - 09-13-18, 07:44 AM
RE: [CA11] Axiom Heading Vector - jeffhart - 09-26-18, 08:02 AM
RE: [CA11] Axiom Heading Vector - Chuck - Raymarine - Moderator - 09-26-18, 09:08 AM
|
User(s) browsing this thread: 1 Guest(s)