Raymarine forum / Raymarine Forums / Multifunction Displays v / Upgrading MFD to C95

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Upgrading MFD to C95
05-16-16, 02:13 PM
Post: #15
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Upgrading MFD to C95
Phil,

This is indeed normal. The Raystar 125 GPS Sensor will default to Satellite Differential operation, typically yielding a HDOP of approximately 1.0 when positioned where the GPS sensor has an unobstructed view of the skies overhead. Unlike when a Raystar 125 GPS Sensor is interfaced to a MFD having a SeaTalk interface (not to be confused with a SeaTalkng or SeaTalkhs interface), the mode of a SeaTalk GPS sensor cannot be remotely switched from Satellite Differential (SD) to non-SD mode ... the GPS sensor will remain in SD mode.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Upgrading MFD to C95 - saustop - 04-25-16, 03:42 PM
RE: Upgrading MFD to C95 - saustop - 04-26-16, 02:19 PM
RE: Upgrading MFD to C95 - saustop - 04-27-16, 09:43 AM
RE: Upgrading MFD to C95 - saustop - 04-27-16, 03:08 PM
RE: Upgrading MFD to C95 - saustop - 05-03-16, 11:12 AM
RE: Upgrading MFD to C95 - saustop - 05-04-16, 07:50 AM
RE: Upgrading MFD to C95 - saustop - 05-16-16, 09:38 AM
RE: Upgrading MFD to C95 - Chuck - Raymarine - Moderator - 05-16-16 02:13 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication