[CA] [CA11] Yamaha to Axiom Pro

[Chuck - Raymarine - Moderator]

Scott,

Should you have updated the ECI-100 with v1.20 software, then it would be recommended that the ECI-100 be reset again by re-installing its software. After doing so, it would then be recommended that the engines be reset per procedures specified by Yamaha. After doing so, engine system within a multi-engine vessel would typically establish Instance IDs for each engine by starting the engines in a manner that the port most engine was started first, followed by the next engine to starboard, followed by the next engine to starboard, and so on. After doing so, then the engines would be switched OFF and the LightHouse 3 Identify engines feature would then be executed to permit the ECI-100 to identify the vessel's engines.