The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] nmea to seatalkng
09-20-18, 12:10 PM (This post was last modified: 09-20-18 01:26 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] nmea to seatalkng
I currently have the following set up which has been partially upgraded over the years.

1. a97 - replaced my E80 at the helm when the screen backlight failed
2. ST70 mfd - this is at the nav station
3. i70s - this replaced another ST70 at the helm
4. p70 - auto pilot control head at the helm
5. EV-1, ACU 400 and rudder reference. these replaced an old Simrad AC 20
6. Raymarine wind indicator and converter pod
7. Airmar depth transducer and converter pod
8. Airmar speed/temp transducer and converter pod
9. Raymarine GPS
10. Raymarine digital radar
11. Raymarine AIS A
12. Raymarine Ray240 VHF

My plan is to replace the Ray240 and AIS with an Icom M506 with integrated AIS

I need to know the best way to network this into my Seatalkng back bone.

Can I simply plug the NMEA converter cable into the ST70 at the nav station and enable the system to receive the ais information on the a97
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] nmea to seatalkng - Bejasus - 09-20-18 12:10 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)